+3.3V single supply operating voltage range.Available in compact Pb-free 56 Pin VQFN packages (RoHS compliant).Compact 64-LD Lead Free LQFP or QFN package.Extended -40☌ to 85☌ industrial operating temperature range.+1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant).USB Bulk data transfer mode (512 byte packets in High Speed mode).UHCI/OHCI/EHCI host controller compatible.Supports bus powered, self-powered and highpower bus powered USB configurations.Configurable I/O drive strength (4, 8, 12 or 16mA) and slew rate.Operational configuration mode and USB Description strings configurable in external EEPROM over the USB interface.

Auto-transmit enable control for RS485 serial applications using TXDEN pin.

UART Interface supports 7/8 bit data, 1/2 stop bits, and Odd/Even/Mark/Space/No Parity.

Fully assisted hardware or X-On / X-Off software handshaking.

Asynchronous serial UART interface option with full hardware handshaking and modem interface signals.

Highly integrated design includes +1.8V LDO regulator for VCORE, integrated POR function and on chip clock multiplier PLL (12MHz – 480MHz).

FT245B-style FIFO interface option with bidirectional data bus and simple 4 wire handshake interface.

Enhanced bit-bang Mode interface option with RD# and WR# strobes.

Option for transmit and receive LED drive signals on each channel.

FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.

Fast Opto-Isolated serial interface option.

MCU host bus emulation mode configuration option.

CPU-style FIFO interface mode simplifies CPU interface design.

Single channel synchronous FIFO mode for transfers upto 40 Mbytes/Sec.

USB to parallel FIFO transfer data rate up to 8 Mbyte/Sec.

(RS232 Data Rate limited by external level shifter).

RS232/RS422/RS485 UART Transfer Data Rate up to 12Mbaud.

Dual independent UART or FIFO or MPSSE ports.

Dual Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to JTAG, I2C, SPI or bit-bang) design.

USB 2.0 High Speed (480Mbits/Second) and Full Speed (12Mbits/Second) compatible.

No USB specific firmware programming required.

Entire USB protocol handled on the chip.

Single chip USB to dual serial / parallel ports with a variety of configurations.

It has the capability of being configured in a variety of industry standard serial or parallel interfaces. The FT2232H is a USB 2.0 High Speed (480Mb/s) to UART/FIFO IC. The FT2232H is FTDI’s 5th generation of USB devices. Frequently asked questions about FT2232HL

Ftdi 232 pinout